The Musical Instrument Thread

DoneView attachment 1084


Sent from my iPhone 4S using Tapatalk

Sorry, from the side, so I can see how much saddle you have above the bridge.

This angle (minus the dude's fingers):

Understring_Radius_Gauges_Detail3.jpg
 
Thanks. It looks like you have plenty of saddle for us to play with. Remind me at some point to have you look under the saddle for any plastic shims under it. Removing one of those (if they're there) can solve this high action problem. More when you report back on the nut action and the truss rod.
 
Thanks. It looks like you have plenty of saddle for us to play with. Remind me at some point to have you look under the saddle for any plastic shims under it. Removing one of those (if they're there) can solve this high action problem. More when you report back on the nut action and the truss rod.

I'm sorry, but this post sounds dirty to me. :lolsign:
 
Brother Hectic, is this not the reason that electrics rule? Fixing an acoustic is so primitive. They sound pretty, however, and nothing beats the vibration of the back of the guitar against your gut.

Two very different beasts!
 
I honestly don't know how much time I'll have within the next few weeks to mess with the guitar since I'll be back in school and in an accelerated course that I have to complete in 3 weeks.

Same reason online time might be limited except maybe early in the morning.
 
It's a little hard to tell from the couple of shots we have to look at here. I'm nervous that there may be some deformation in the sound board or bend in the neck.

For as much adjustment as is needed, and as little time as you have to work on it in the coming weeks, I'd drop it off at a guitar shop to see what they can do with it.

I used to do this kind of work on my guitars, but I have a lot of woodworking experience, and always had another guitar to play while I was working on one.
 
I'm taking an accelerated course that ends June 21st and goes five days a week so I won't even be able to look at the guitar for too long. Once that's done and I can settle in to a summer break I'll pick it up again. Maybe mess with it on the weekends in the meantime.
 
You don't understand. This kind of work needs to be started about 11 pm, so that when your guitar is in pieces on the floor with two broken strings about 3 in the morning, you can say, "Why the fuck did I think this was a good idea?"

And that's how you learn.
 
You don't understand. This kind of work needs to be started about 11 pm, so that when your guitar is in pieces on the floor with two broken strings about 3 in the morning, you can say, "Why the fuck did I think this was a good idea?"

And that's how you learn.


And that's probably how it will wind up, too.
 
And that's probably how it will wind up, too.

With an attitude like that, you'll be maintaining your own guitar in no time!

Seriously, there is something to be said for seriously effing something up while trying to fix it:

1) You learn your limits, especially of your patience.

2) You learn new skills. It's like getting lost. The best way to never forget how to get somewhere is to get lost as shit trying to find it.

See, I believe that rules are meant to be broken. I learn best through experience. Don't tell me why, show me. My hot blonde employee is the opposite. She really likes rules. Today I called her "The Crosswalk Nazi" because she won't cross the road against the light.

Elvis shook his hips like a colored man on national TV while singing a song two steps removed from old black men playing the blues on the front porch in Mississippi. They said he shouldn't do that--it was against the rules.

And today we have rock and roll.
 
I'm getting a premonition of CF's obit --

"Casual Fan was tragically flattened by a tractor trailer today in a misguided attempt to create rock and roll."
 
Also, do the nut action test: http://www.frets.com/FretsPages/Musician/GenSetup/NutAction/nutaction.html

And the test to see if you have your truss rod adjusted right:

http://www.taylorguitars.com/global/pdfs/truss_rod_adjustment.pdf‎

With the truss rod test, you should just barely see daylight under the low E at the sixth fret. You should be able to tap the string at that fret and hear a tiny little "plink" as the string taps the fret.

There is a gap between the sixth string and the fret, but it's a little bigger than the picture shows. Not A LOT bigger, but there's definitely more daylight between the string and the fret.


Sent from my iPad Mini using Tapatalk
 
There is a gap between the sixth string and the fret, but it's a little bigger than the picture shows. Not A LOT bigger, but there's definitely more daylight between the string and the fret.

Okay, this is where it gets fun. Follow the directions in the Taylor document to take some of the bow or concavity out of the guitar neck. The only difference should be that your truss rod access hole (snicker) is in the soundhole, not in the headstock (double snicker). You'll need whatever size Allen wrench fits in the hole. I would turn it one quarter turn, tune it (it will now be out of tune), and re-check the action at the sixth fret. If it looks pretty damn close but doesn't touch the fret wire, strum all six strings pretty aggressively and make sure there is no fret buzzing. If there is, back the truss rod off 1/8 turn counterclockwise, retune, and check the action again.

Next--the saddle.
 
Okay, this is where it gets fun. Follow the directions in the Taylor document to take some of the bow or concavity out of the guitar neck. The only difference should be that your truss rod access hole (snicker) is in the soundhole, not in the headstock (double snicker). You'll need whatever size Allen wrench fits in the hole. I would turn it one quarter turn, tune it (it will now be out of tune), and re-check the action at the sixth fret. If it looks pretty damn close but doesn't touch the fret wire, strum all six strings pretty aggressively and make sure there is no fret buzzing. If there is, back the truss rod off 1/8 turn counterclockwise, retune, and check the action again.

Next--the saddle.

I clicked on that taylor document. Says 'page not found'.
 
Back
Top Bottom